SkyView Class 1 Mode-S Transponder
The SkyView Class 1 Mode-S Transponder provides a myriad of important features including 1090ES ADS-B OUT and Traffic Information Services (TIS). When equipped with the SkyView Certified transponder and GPS modules, and aircraft is compliant with the FAA 2020 ADS-B Out Mandate. It can automatically switch between air and ground modes for reduced pilot workload.
The SkyView Transponder is remote mounted and controlled using the SkyView Transponder Control Menu. It requires no dedicated panel-mounted controls. This saves panel space and reduces installation time.
Antenna not included. Can be used with any TSO/PMA transponder antenna.
The antenna connector is not included. Requires a Dual Crimp RG142-400 AMP Male.
Made for the SkyView System with control and annunciation appearing on the SkyView Display. The transponder module can be mounted anywhere in the airplane that is convenient. It communicates with the SkyView system via RS-232 Serial data ports on each SkyView Display.
Weighing only 1 pound, and with compact dimensions (5.6" by 1.8" by 2.4"), the SkyView transponder module can be located into the smallest places of your airplane. A quick release mounting tray allows for simple installation and easy removal if needed for service.
Features TIS Traffic (USA).
Meets USA and Europe ADS-B Out Mandates. Note, full FAA ADS-B Out compliance also requires a compliant GPS such as the SV-GPS-2020 be connected.
Meets the FAA ADS-B OUT Class 1 “High Power” transponder requirements.
Dynon Warranty, Support, and Service: This transponder comes with a 3-year Dynon Warranty.
These specifications are provided for familiarization only. For actual installation, please use the current full installation documentation.
SV-XPNDR-261 SkyView Class 1 Mode-S Transponder
|Usage:||250 Watt; Can meet 2020 FAA ADS-B Out mandate|
|Type:||Class 1 Mode S|
|Compliance:||ETSO 2C112b Class 1 Level 2els, ETSO C166a Class B0, TSO C112c Class 1 Level 2els, TSO C166b Class B1S|
|Supply Voltage (DC):||9 - 33 V|
|Power Consumption:||6 Watts (typical) (idle: 0.15 A, active: 0.34 A at14 V)|
|Transmitter Power:||250 W nominal at connector|
|Weight:||0.9 Lb. (400 g)|
|Dimensions:||2.4" x 1.8" x 5.6" (62 x 45 x 141 mm)|