Dynon Certified | Pricing Overview

DYNON CERTIFIED PRICING OVERVIEW

Every Dynon Certified SkyView HDX system starts with two sets of independent and redundant flight instruments that are IFR capable when paired with an IFR certified navigator. SkyView HDX displays also includes a full moving map with robust VFR GPS flight planning and navigation capabilities. With packages starting under $12,000, there is a Dynon Certified panel available for nearly everyone.

SkyView HDX is now approved in nearly 800 Single and Twin-engine aircraft models. Some models already have two or three-axis autopilot currently available.

SkyView HDX Components Pricing

Core System: Primary and Standby Flight Displays, VFR GPS Navigator with Moving Maps

Includes: SkyView HDX display (7” or 10”), SV-ADAHRS-200 Module, Remote Magnetometer, ADS-B Out Compliant GPS, Backup Battery, Wiring Harness, D30 Standby Instrument, and STC Permission Letter.

7” Core: $11,992 / 10” Core: $13,373

Additional Display(s)

Includes: SkyView HDX display (7” or 10”), Backup Battery, and Wiring Harness. Up to 3 total SkyView HDX displays can be installed in an airplane.

Additional 7” Core: $3,807 / 10” Core: $5,188

COM Radio

Includes: COM Radio, vertical or horizontal control panel with dedicated buttons for tuning Tower/CTAF, Ground, ATIS/Wx, and ATC. It also features dual watch to allow monitoring of the standby frequency.

Dynon COM: $2,608 | Trig Audio Panel: $1,615 - $2,395 | Trig NAV/COM: $4,495

Engine Monitoring (Single-Engine)

Includes: SV-EMS-220 Engine Monitoring Module, all sensors and probes to measure EGTs, CHTs, Fuel Flow, Oil Pressure, Oil Temp, and more. Other piston engine configurations are supported, including radial and 6+ cylinders. Max 14 total CHT+EGT.

Standard 4 - Cylinder Starting at: $2,955 / Standard 6 - Cylinder Starting at: $3,373

Engine Monitoring (Twin-Engines)

A dedicated display is required for engine monitoring in twin-engine installations and may be either 7" or 10". Twins require an SV-EMS 220, sensors, and harnesses for each engine.

Standard 6 Cylinder (with 7" display) Starting at: $10,520

ADS-B In - Traffic and Weather

Includes: SV-ADSB-472 Dual Band Traffic and Weather Receiver, Receiver Harness, and Rod Type Antenna.

Kit Subtotal: $1,070

Mode S Transponder with 2020-Compliant ADS-B Out

Includes: Class 1 Mode S Transponder with 1090ES ADS-B Out, Transponder Harness.

Kit Subtotal: $2,764

Dedicated Knob Panel

Dedicated controls to adjust the most-frequently changed in-flight parameters: Heading, Altitude, and Altimeter Setting. Especially recommended for installations that include a Dynon Autopilot. Available in Vertical or Horizontal Orientations.

Kit Subtotal: $364

IFR Connectivity Kit

SV-ARINC-429 Interface Module (1 required for each IFR GPS/Nav device).

Kit Subtotal: $576

SkyView Network Cables

Displays connect to many modules and components via the dual-redundant SkyView Network. Dynon manufactures SkyView Network cables, hubs, and accessories to minimize harness construction time and installation costs.

Estimated Subtotal: ~$790

Cessna Autopilots

Cessna 172, Models F through S
Two Axis

Includes: Capstan Autopilot Servos - Roll and Pitch, Servo Mounting Kits - Roll and Pitch, Capstan Servo Accessories, and Network Autopilot Servo Cable Kits.

Kit Subtotal: $4,203

Cessna 182E thru 182T, R182, T182, TR182, and T182T
Two Axis

Includes: Capstan Autopilot Servos - Roll and Pitch, Servo Mounting Kits - Roll and Pitch, Capstan Servo Accessories, and Network Autopilot Servo Cable Kits.

Kit Subtotal: $5,971